The production process of handbook false eyes is as follows:

Put the raw material into a container and spread it flat

The raw material in the downward pressure container is formed by using a linear seam and double sided adhesive to extract the raw material from the linear seam One end of the formed raw material is glued with double side adhesive, and the double side adhesive with raw material is removed to retain the first semi finished product

Merge two sets of first half finished products to retain the third half finished products

Place two lines on both sides of the third semi finished product, and then apply adhesive in the middle of the two lines After the adhesive solids, the fourth semi finished product is obtained

The fourth semi finished product is cut along a line near the edge to retain the second semi finished product

The second semi finished product is curled and shaped, and the steps for false eyes include: laying the second semi finished product on paper soaked in water, rolling the paper and the second semi finished product into a circular tube for heating

Dry the heated inner roll paper and the circular tube of the second semi finished product, and soap them in set water

Dry the soaped paper and the second semi finished round tube, then spray the dry round tube to disperse the paper inside the tube due to moisture, and observe false eyes on the paper False eyelashesFalse eyelashes